You wake up ready to enjoy a delicious cup of Nespresso coffee only to find your Vertuo machine uncooperatively blinking orange twice at you. This repetitive orange flashing indicates there’s an issue preventing the brewing process from starting.
But never fear – while frustrating, an orange two-blink warning light usually signals simple problems you can often fix yourself without calling the repair technician. Read on to learn what’s behind the cryptic orange blinking, plus troubleshooting tips to get your Nespresso machine happily brewing again.
What Does Blinking Orange Twice Mean?
Essentially those dual orange flashes translate to: “I can’t start the brewing cycle”. This could be triggered by several common issues:
– Overfilled Water Tank
– Loose Water Tank
– Faulty Motor
– Defective Circuit Board
– Bent/Obstructed Piercing Needles
Over 90% of the time however, the orange blinking relates to water delivery problems from the tank or heating system. Time to play detective!
Overfilled Water Tank Issues
It’s surprisingly easy to overfill the water tank which can interfere with the brewing operation. Check the following:
Water Level Too High – Make sure you haven’t exceeded the MAX fill line. Try emptying some water.
Tank Seated Incorrectly – An overfull tank may prevent proper seating which gets detected during initiation. Refill tank per guidelines.
Tank Lock Mechanism Issues – If the water tank has problems locking securely into place, the sensor detects this and fails to start. Remove tank, inspect lock and realign.
Loose Water Tank Problems
If the water tank is not fully locked and pressed firmly into place, blinking orange occurs due to improper water delivery sensing. Try reseating the tank:
Remove and reinsert tank checking it clicks fully into place
Check tank rim seals for obstructions –clean seals if needed
Inspect lock tabs for damage preventing complete closure
Initiate brewing process to see if tightening tank security fixed issue
Faulty Heating System
If properly reseating the water tank fails to stop the infernal orange blinking, chances are the issue lies with the internal heating system not receiving water as expected:
Scale Buildup – Try descaling per manufacturer’s instructions in case mineral deposits are interfering with water flow
Bad Heat Sensor – Descale first, but the heating mechanism’s sensors may need replacement if descaling proves ineffective
Motor Malfunction – Water isn’t getting transported. Have unit inspected for pump/motor problems
Unless you witness obvious leakage, cracked housing or electrical issues, start by checking the water tank seating and simple descaling before assuming major component failure.
Why Does My Vertuo Keep Blinking Orange Twice?
If your stubborn Nespresso simply won’t stop blinking orange despite the above troubleshooting, here are a few other potential culprits:
Damaged Piercing Needles – The holes inside the brewing chamber that puncture capsules could be bent or clogged thus getting detected as abnormalities by the sensors.
Defective Circuit Board – If the computerized control board is glitchy, this can interfere with the machine’s pre-programmed start-up protocol and prevent initiation.
Disconnected/Faulty Wires – Make sure no loose internal wiring is triggering the sensor disruption. Inspect wires for fraying also.
Still stumped? Be sure to contact Nespresso customer service if basic troubleshooting proves ineffective. Include specific details about prior decalcifying efforts, water tank behavior observations, and any evidence supporting heating mechanism issues. The company can offer tailored advice based on your Vertuo’s unique history.
Preventing Blinking Orange in Future
To help avoid battling blinking orange again, implement these best practices:
– Descale machine regularly to prevent mineral buildup sabotages
– Ensure water tank is fully pressed into place after refills
– Don’t overfill tank past maximum line
– Care for internal piercing needles gently to prevent damage
– Keep exterior housing and rim seals clean of sticky messes
– Always initiate brew head locking process before starting coffee
While a blinking orange light can seem dire, a bit of methodical inspection and troubleshooting often reveals straightforward remedies. First ensure proper water tank filling and seating before working way deeper into machine’s interior operation. With some persistence and optimism, you can defeat the orange blinking monster to reclaim your precious caffeine! I hope this Nespresso Vertuo Blinking Orange Twice post helps you.